剪板机刀片简介

剪板机是用来剪裁直线边缘的板料毛坯，它是借助于运动的上刀片和固定的下刀片，采用合理的刀片间隙，对各种厚度的金属板材施加剪切力，使板材按所需要的尺寸断裂分离。
Shearing Machine is used to cut the sheet blank of straight edge; it works by the running upper blades and the fixed lower blade, and the reasonable gap of the shearing blades. It brings the shear force work for a variety thickness of the metal board, and separates the board according to the requirement size.

剪板机的刀片广泛适用于：轻工、航空、船舶、冶金、仪表、电器、不锈钢制品、钢结构建筑及装潢行业，由T10、9CrSI、6CrW2Si、Cr12MoV 、H13等优质合金工具钢制造，刃口锋利、耐磨损。
Shearing blade is widely used in light industry, aviation, shipbuilding, metallurgy, instrumentation, electrical appliances, stainless steel products, steel construction and decoration industries. And it's always made with the T10, 9CrSI, 6CrW2Si, Cr12MoV, H13 and other high quality alloy tool steel, so it is sharp and wear-resistant.

剪板机刀片是属于锻压机械中的一种，只有良好的保养才能使其寿命长久，让用户用的更顺心。在使用时，要注意剪板机刀片的保养方法。
Shearing blade belongs to kind of forging machinery. It will have long usage life and make customers satisfactory only bases on good maintenance. You should pay attention to the maintenance method of shearing blade during using.

1、严格按照操作规程进行操作。
1.You shall be in strict accordance with the operating rules to operate.

2、剪板机刀片必须经常保持清洁，未油漆的部分擦防锈油脂。
2.The Shearing Blades much be kept clean, and the unpainted section should be wiped antirust oil.

3、每次开机前按润滑图表要求定时、定点、定量加润滑油，油应清洁无沉淀。
3.Before each start, you should add lubricant oil with the fixed time, fixed location, and fixed quantity according to the lubrication chart. The oil should be clean without any precipitation.

4、电动机轴承内的润滑油要定期更换加注，并经常检查电器部分工作是否正常安全可靠。
4. Lubricant Oil inside the bearing of motor should be added or replaced regularly. And often check whether the electrical part works normally, safety and reliably.